Bevel helical geared motors are angular geared motors where the gear unit output shaft is rotated through 90° to the motor shaft. Bevel helical geared units can either have a solid or a hollow shaft. Bevel helical geared motors represent the ideal solution for drive tasks where an angular geared motor with high power density is required with continuously high output torques. 

FLK bevel helical gearboxes are designed for continuous duty. The gearbox housings made of gray cast iron are developed in 3D CAD and have an optimized structure in terms of rigidity and vibration absorption. Radial shaft seals with dust-protection lips prevent oil from leaking out of the housing and dust and water from entering it. The gear wheels of the helical gear stages are milled and their surfaces hardened. The tooth flanks are ground or honed so that they are convex and corrected in terms of the profile. For the standard range, the bevel gear stage is milled, its surface is hardened, and it is lapped in pairs. Optimum running smoothness is also achieved thanks to the helical gears' helical teeth. Positioning the bevel gear stage as the second stage means that less noise is emitted. The output shaft is positioned at a right angle to the input shaft.

 
FLK bevel helical gearboxes are part of the FLK modular system. With helical, parallel shaft, helical worm, or variable speed gearboxes and three-phase AC motors with or without brakes, this system covers all possible drive combinations, right up to electronic variable speed drives.
 

HELICAL-BEVEL GEAR MOTORS PARAMETERS

• Power range: 0.12-200kW
• Output speed(r/min): 0.05 - 522
• Ratio: 5.36-106.38
• Output Torque(N.m): Top to 50000N.m

• Models:12 models ranging from K37 to K187
• Large output torque,smooth startup,high efficiency
• Noise Level: Low type 65-75 Db, Smooth and stable in run
• Material: Carburized gears & shafts and gears HRC58-62 
• Transmission efficiency: the efficiency of single machine is bigger than 90%.
• Equipped with spiral bevel transmission which meets 90 output requirements.
• Output way:Hollow shaft with feather key, shrink disk, splined shaft ,solid shaft etc.
• Bearing: China standard. But SKF, FAG, NSK, TIMKEN, NTN, KOYO, C&U is a aviable if need
• Mounted way: Hollow shaft,foot-mounted,flange-mounted,shaft-mounted,flange-mounted with hollow shaft,foot-mounted with hollow shaft,torque armed

HELICAL-BEVEL GEARBOX APPLICATIONS

• Chemical & recycling / Conveyors / Food Machinery
• Mixers / Coat & Mining / Poultry Plants / Construction Equipment
• Paper Mills / Recycling Machines / Rotary Feeder / Textile Logistics
• Hoist & transport / Harbor & ship building
• Cement & material / Electric power& energy / Coal & Mining / Wastewater Treatment

WE CAN WE DO FOR YOU

• Providing correct gearbox and combined gearbox to meet your application needs;
• Lowering maintenance cost and lifting operation efficiency;
• Improving production capacity and boosting economic profitability.