1,K series reducer are based on the building block design, so it's convenient for them to fit all types of motors or other power input. The same type of combine can fit motors with different power, so that it's possible for different types of machines to combine or connect.

2,High transmission efficiency. A single machine can reach a transmission efficiency as much as 96%.

3,Precise division of transmission ratio with a wide range. The combination of machines can produce a large transmission ratio at a low output rotate speed.

4,Various ways of installation. Horizontal installation at any position or B5, B14 flanged installation, the deceleration machine have two bottom feet processes to install the flat surface.

Working Environment

1,Working temperature: -40~50°c ( The lubrication should be heated above 0°c if the machine works below 0°c)

2,The altitude of working place should be lower than 1000 meters.

3,The input rotate speed should not exceed 1800rpm. The circumferential speed of the gear should not exceed 20m/s.

4,Suitable for normal-reverse rotation.

5,Without industry limitation.

6,Please consult our technical supporting department for other circumstances.

Applications:

   Our product are widely used in metallurgy, mining, petrochemical, tobacco, ceramics, rubber, food, beverages, transportation and other industries.